|
Title: Valentine V1 Installation |
 |
|
Last Updated: |
|
|
Published Date: |
March 30, 2007 |
|
Problem:
How and where to mount my Valentine V1 that was both secure, functional and did
not detract from the RTs clean crisp lines.
Solution:
I installed the Valentine V1 on my
BMR shelf. The installation was standard and I followed the recommendations
of BMR expect for where to mount the
Remote Audio Adapter. I chose
to mount my Remote Audio Adapter under the main part of the BMR shelf. This was
mainly to help hide the device and keep it more weather proof. Once the Remote
Audio Adapter is configured and adjusted, there is not need to make any further
adjustments. In fact, I place a clear piece of scotch tape on the control knob
to keep it from moving and falling out of adjustment.
The one lesson I learned from my V1 installation on my previous LT, was to use
only factory quality audio cables, even though the V1 is mono output (no
stereo). The Autocom came with one 3.5mm audio cable and I purchased two right
angle connectors to further dress the installation from Radio Shack.
|
Click to download all pictures in a single WinZip file. (~1.7MB) |
|
|